WaveArts TubeSaturator VST AU DX RTAS 1.00 (PC - MAC) | 5,44 MB for PC | 7,87 MB for MAC
Tube Saturator is the world’s most accurate real time tube amp plug-in. Unlike other tube simulators, which use radically simplified models, Tube Saturator uses state of the art circuit simulation technology to capture every nuance of an analog circuit.
With circuit simulation, the analog schematic completely defines the signal processing. The schematic is converted into a system of non-linear differential equations which is solved at each sampling period, in realtime. That’s mathematical talk for “it sounds exactly like theanalog circuit”.
The circuit simulation technology is extremely CPU intensive, and hence we are only able to simulate very simple circuits. Tube Saturator is in fact a basic circuit consisting of a Baxandall type three-band EQ feeding two 12AX7 triode preamp stages. It’s similar to preamp stages you’d find in a guitar amp, but it is by no means a complete guitar amplifier model, that would be way too expensive to simulate even with today’s fast CPUs. However, it is extremely accurate, and hence you can get the same distortion and tonal characteristics that you’d expect from a real tubepreamp.
Use Tube Saturator to add a bit of analog warmth to recordings, or increase the drive for some distortion. You can use it as a saturating peak limiter too.
Increasing the Drive control increases the (digital) input gain while decreasing the (digital) output gain, so you can easily adjust distortion levels. The FAT switch changes the biascircuit of the first preamp stage to increase gain.
Tech Specs:
* Accurate tube preamp simulator using 64-bit circuit simulation technology
* Two common cathode 12AX7 preamp stages
* Baxandall 3-band EQ
* Drive control for distortion adjustment
* EQ bypass
* FAT mode for increased punch
* Analog style metering
* No latency
* Up to 192 kHz sampling rate, depending on CPU speed.
* Mono or stereo
Requirements:
Macintosh
* OS X 10.4, 10.5, 10.6 or later.
* A host program that supports the AU, MAS, VST, or RTAS plug-in architecture.
* Universal Binary (Mac Intel) support for AU and VST only (no RTAS).
Windows
* Windows 2000, XP, or Vista.
* A host program that supports the DirectX, VST, or RTAS plug-in architecture.
The circuit simulation technology is extremely CPU intensive, and hence we are only able to simulate very simple circuits. Tube Saturator is in fact a basic circuit consisting of a Baxandall type three-band EQ feeding two 12AX7 triode preamp stages. It’s similar to preamp stages you’d find in a guitar amp, but it is by no means a complete guitar amplifier model, that would be way too expensive to simulate even with today’s fast CPUs. However, it is extremely accurate, and hence you can get the same distortion and tonal characteristics that you’d expect from a real tubepreamp.
Use Tube Saturator to add a bit of analog warmth to recordings, or increase the drive for some distortion. You can use it as a saturating peak limiter too.
Increasing the Drive control increases the (digital) input gain while decreasing the (digital) output gain, so you can easily adjust distortion levels. The FAT switch changes the biascircuit of the first preamp stage to increase gain.
Tech Specs:
* Accurate tube preamp simulator using 64-bit circuit simulation technology
* Two common cathode 12AX7 preamp stages
* Baxandall 3-band EQ
* Drive control for distortion adjustment
* EQ bypass
* FAT mode for increased punch
* Analog style metering
* No latency
* Up to 192 kHz sampling rate, depending on CPU speed.
* Mono or stereo
Requirements:
Macintosh
* OS X 10.4, 10.5, 10.6 or later.
* A host program that supports the AU, MAS, VST, or RTAS plug-in architecture.
* Universal Binary (Mac Intel) support for AU and VST only (no RTAS).
Windows
* Windows 2000, XP, or Vista.
* A host program that supports the DirectX, VST, or RTAS plug-in architecture.
Download :
Tidak ada komentar:
Posting Komentar